Anodised aluminium frames, manufactured to module drawings.
Custom extrusion profiles, cut, drilled, punched and assembled against the customer's module drawings. Long-side and short-side profiles with corner keys where required; different frame heights and wall thicknesses; silver, black and other anodised finishes. Profile dimensions, alloy, temper and anodising thickness are matched before production.
For module manufacturers buying to drawings.
Module makers who need frames built to their module design, not a catalogue. Profile geometry, alloy, temper, anodising and machining are fixed in writing before extrusion, and inspected against the drawing before shipment.
Available configurations
- Profiles
- Long-side & short-side per module drawing · frame heights & wall thicknesses per design
- Alloy / temper
- 6063-T5 typical · 6063-T6 / 6005-T6 where the drawing specifies
- Anodising
- Colour (silver · black · other) and film thickness per specification
- Processing
- Cutting · drilling · punching · grounding marks · drainage holes per drawing
- Corner keys
- Geometry, material and fit per the approved drawing, where required
- Protective film
- Applied where specified · removal characteristics stated
- Tolerances
- Cut-length and angle tolerances stated in writing pre-production
- QC
- Dimensional, finish and corner-fit inspection per agreed scope
Reference diagrams illustrate the information required for quotation. Production is governed exclusively by the approved buyer drawing and purchase specification.
From drawing to production release.
Nothing goes to mass production on a verbal description. The approved technical document governs the order.
Drawing / datasheet
The buyer's drawing, datasheet or BOM is reviewed against real manufacturing options and aligned with the selected line in writing.
Sample where required
A sample or golden sample runs against the approved document, with the agreed inspection scope applied.
Buyer sign-off
The buyer approves the sample and technical documents. Deviations are corrected before release, not argued after arrival.
Production release
Mass production releases against the approved document. The inspection scope and document set follow the contract.
Quality, packing, documents.
What may be inspected, how the cargo is protected, and which documents travel with it. Inspection scope is agreed per contract, by the factory, Torix or an independent inspection company.
Checked against the approved document.
Profile dimensions and wall thickness against the drawing, anodising film thickness and colour conformity, cut length and angle within stated tolerances, corner-key fit, with independent inspection where agreed.
Packed for the ocean, marked for the site.
Profiles interleaved and bundled to prevent finish damage, cartons or pallets per the buyer's handling, corner keys packed and counted separately, quantities itemised on the packing list.
The matched set, every shipment.
Commercial invoice, packing list, certificate of origin, bill of lading, factory dimensional and anodising reports, inspection record per scope, insurance where the Incoterm calls for it.
Asked often.
If your question isn't covered, email the desk, most first-time questions come back with a one-line answer and a supporting document.
Do you have standard frame sizes?
We quote against your drawing rather than a catalogue, the reference geometry on this page illustrates the parameters a drawing controls, not a standard offer.
Which alloys and tempers are available?
6063-T5 is typical for module frames; 6063-T6 and 6005-T6 run where the drawing specifies them, capability is confirmed for the selected extruder at quotation.
What anodising film thickness can be held?
Film thickness follows your specification and the line's capability, stated in the quotation and verified in the anodising report.
Are corner keys included?
Where the design requires them, corner keys are quoted with the frames against the same drawing, fit is part of the inspection scope.
Upload your drawing for review.
Send the drawing, datasheet or bill of materials with quantity, destination and timing, the TRX-AF quotation returns against your document, with every claim confirmed for the selected manufacturer.